Spotlight: LiteTrike Million Color LED Lighting Kits

by • April 24, 2013 • Mosaic Showcase, ShowcaseComments Off on Spotlight: LiteTrike Million Color LED Lighting Kits2186

Looking to add complete and custom lighting to your trike? Look no further with LEDGlow’s new LiteTrike® Million Color LED Lighting Kits! Our trike LED lighting kits are available in two options, LiteTrike® I and LiteTrike® II, that will give you full customization over the desired lighting scheme of your trike.

What makes this motorcycle LED lighting kit a trike LED lighting kit? The main aspect that makes this a trike LED kit is that the strips were designed specifically for a trike motorcycle. Each LiteTrike® LED kit comes standard with 24 inch and 18 inch strips for underneath the running boards, behind the trunk, or fenders, whereas the smaller 3 inch strips can be mounted to openings such as any fairing opening, vent pockets or behind the speakers. The remaining 6.5 inch, 8.5 inch and 10.5 inch light strips can be mounted to more accessible areas like under the gas tank, frame rail, or rear axle, adding total illumination to your trike.

What’s the difference between the two LiteTrike® Kits? The only difference between the two trike LED kits is that LiteTrike® II comes with 6 more lighting strips than LiteTrike® I. LiteTrike® I comes standard with 12 LED strips: (4) 3 inch, (2) 6.5 inch, (2) 10.5 inch, (2) 18 inch and (2) 24 inch strips. LiteTrike® II includes 18 LED lighting strips: (6) 3 inch, (4) 6.5 inch, (2) 8.5 inch, (2) 10.5 inch, (2) 18 inch, and (2) 24 inch strips. As I mentioned above, the included strip lengths were designed particularly for trikes with each million color SMD LED strip being 1/8th of an inch in thickness and extremely flexible so they can be mounted on the tighter locations of your trike. If you’re mounting a strip that is a little too long for an area, the strips have the ability to be shortened by cutting every third SMD chip. Just remember to cut the end of the strip that doesn’t have the power wire connected to it. The slim and easy to hide control box is what really sets this kit apart from others. It can power up to a total of 250 SMDs (750 LEDs) and features 15 different solid colors, 2 color cycle modes, 3 flashing modes, and 1 fading mode, which are all easily selected with the included wireless remote. Offered with every trike LED lighting kit is 3M™ Adhesion Promoter which creates an extra layer of adhesion between the LED light strip and the mounting location of your trike. This is an optional installation accessory, but it gives the mounted LED strip added strength when combined with the 3M™ tape already on the strip. Each trike LED light kit comes with LEDGlow’s one year limited warranty and free lifetime technical support.

Pin It

Related Posts

Comments are closed.